Valtra has just launched its all-new G Series. This marks the very first of the fifth generation of Valtra tractors. The new Series was designed and introduced to bridge the gap between the smaller chassis A Series (approx. 4t) and the larger N Series (6.3t). The range consists of five models ranging from 105hp up to 135hp (110hp to 145hp with boost).

Valtra has described the G Series as its Swiss army knife, with specific focus on front loader, field work and road transport.

The G Series is equipped with a 24+24R transmission with four ranges and six power-shift gears.

The G Series is the first tractor in the 100hp to 145hp Valtra range to offer SmartTouch controls as well as full precision farming capabilities. Valtra Connect telemetry is standard on Versu models of the G Series, while load-sensing hydraulics are standard on Active and Versu models.

The new G Series is available in four equipment levels: Basic, Comfort, Technology and Technology Pro.

Production of the new G Series has already kicked off. We understand 10 units have been built to date. Valtra confirmed to the Irish Farmers Journal that deliveries of the new G Series to Ireland will start in mid-October.

Engine

The new G Series is powered by four-cylinder, 4.4-litre AGCO Power engines. Valtra says that the compact size of the engine enables the low nose, which offers very good visibility. Designed in Finland but built in China, this AGCO engine complies with the Stage V emission regulations without an EGR (exhaust gas recirculation).

Valtra says all models offer power boost at field speeds when driving in B5 or higher gears. Valtra’s traditional Sigma Power boost is also available for the PTO.

The new G Series is powered by four-cylinder, 4.4-litre AGCO Power engines.

Transmission

The G Series is equipped with a 24+24R transmission with four ranges and six power-shift gears. The shifts from B to C ranges and between C and D ranges are automated. In traditional Valtra fashion, the parking brake is integrated with the forward-reverse shuttle lever.

The slowest working speed with the creeper gear is 120m/hr, while Versu models can be operated using just the drive lever. The AutoTraction hill-hold function keeps the tractor stationary even on steep hills without having to use the brakes.

HiTech models have an open hydraulics system that produces 100l/min, while Active and Versu models have load-sensing hydraulics that produce 110l/min. Up to four hydraulic blocks are available at both the front and rear. Versu models are available with up to five rear spool valves and up to four valves in the front.

Versu models with the SmartTouch interface can access the same SmartFarming features as the bigger N and T Series models.

Cab

The cab frame is physically the same as the existing A Series, however, the interior and interfaces are different. The G Series cab features 5.7m2 of glass, including 0.35m2 in the panoramic roof. Some optional specs include front and cab suspension, heated mirrors, air conditioning, a lower cab heater and USB charging plugs.

Versu models with the SmartTouch interface can access the same SmartFarming features as the bigger N and T Series models. Active models are also available with auto-guidance and precision farming features that can be activated via the SmartTouch Extend terminal.

Like all Valtras gone before, the G Series is also suitable for forestry tasks. For forestry work, the G Series can be specified with narrow mudguards, a steel fuel tank, polycarbonate glass, forest tyres, a rotating seat and cab protection. The auxiliary light pack provides four working lights at the front and six at the rear, which also turn on automatically when reversing, facilitating work in dark conditions.

The G Series is the first tractor in the 100–145hp Valtra range to offer SmartTouch controls as well as full precision farming capabilities.

G Series specs

  • Engine: four-cylinder, 4.4-litre AGCO Power engines.
  • Transmission: 24+24R power-shift.
  • Wheel base: 2,550mm.
  • Length: 4,405mm.
  • Height: 2,830mm.
  • Width: 2,460mm.
  • Turning radius: 4.36m.
  • Weight (full tanks and driver]: 5,140kg.
  • Weight distribution front/rear: 41/59%.
  • Max total weight: 9,500kg.
  • Fuel capacity: 200l.
  • AdBlue capacity: 21l.
  • Min tyre size: 420/85R34 + 340/85R24.
  • Max tyre size: 600/65R38 + 480/65R28.
  • Starting price: €83,340 plus VAT.