This is a subscriber-only article
The larger 85-115hp models in Case IH’s Farmall C range have been revised for 2017, with updates including the introduction of a version of its Multicontroller concept. Using a simpler design found on larger Case IH tractors, it comprises a right-hand console-mounted gear lever that selects the four main gears and incorporates a series of buttons controlling forward/reverse shuttle, two-speed powershift, powerclutch button and linkage raise/lower operation.
Powershuttle response can be adjusted to one of three levels according to the work in hand, while a further button on the rear of the lever allows operation of the linkage buttons to be diverted to the rear or, where fitted, the front linkage.
A new constant engine rpm feature makes it possible to set and store two engine speeds. Other new features include 540/540E/1,000rpm PTO, optional second assister ram to increase lift capacity from 3,700kg to 4,400kg, and a loader-ready option.
Landini has a new line of 70-111hp Rex tractors, aimed at the livestock and specialist crop farmers, as well as fruit growers. All powered by Stage IV Deutz four-cyl/2.9-litre engines, the tractors are available in 2wd or 4wd, and feature a new four-speed/three-range transmission with mechanical or hydraulic reverse shuttle, two- or three-speed powershift and creep options.
Hydraulic packages comprise 55 + 30 l/min double pump(60 + 30l/min in GT versions) or 25 + 55 + 30l/min triple pump for cabbed models. Cabbed tractors for fruit spraying can be equipped with Class 4 filtration, providing pressurised operator protection sufficient to filter out spray mist.
With its new 5 series models, Deutz-Fahr has now revised all of its mainstream tractor ranges to meet Stage IV emissions regulations. Aside from emissions tweaks using a DOC and SCR to also help produce an average 5% more power, gear selection has been improved by incorporating a new Bowden cable design claimed to make for smoother shifting, and these two upgrades combine to create claimed reductions of up to 40% in both in-cab noise and vibration.
Other enhancements for the three 110-126hp models include uprated Hydro Silent-Block cab suspension, a new design of suspended front axle, and a new lighting package, front and rear. Meanwhile, production of the three-model range of 295-336hp (max) Deutz-Fahr 9 series tractors is now under way at SDF’s recently extended factory in Lauingen, Germany, and production versions of the up-to-440hp 11 series tractors first shown in prototype form at Agritechnica 2015 will receive their full launch at the November 2017 edition of the same show.
Indian tractor makers seeking a slice of the sub-100hp sector were out in force at EIMA and, while some of them (see Solis), are carving out a niche in the lower end of the Irish market, others are still seeking to make inroads into Europe.
One popular way of testing the water is for a manufacturer to focus initially on ensuring one or two models in its ranges are suitable for the region, with emissions regulation-compliant engines and sound and safety levels that meet EU standards. Manufacturing combines since 1985 and tractors since 2002, Delhi-based Preet offers a line of the latter, spanning 35-90hp and including 2wd and 4wd versions plus cabbed and open-station variants.
On 4wd models, transmissions and axles are from Carraro, while engines are from Preet’s own design and engineering departments. The firm recently entered the conventional baler market, and has further projects in the pipeline, including a backhoe loader.
As a country with a strong market for simple, low-cost models that suit cropping farms in the dry climate of the south as well as tougher livestock and arable work in the (relatively) wetter north, Italy has a number of low-cost manufacturers serving its tractor market.
Indian maker Sonalika, which brings its Solis-branded tractors to Ireland through Dublin-based D&S Machinery, showed off the largest tractor it has yet produced, a 90hp machine powered by Sonalika’s own four-cylinder engine, meeting the latest Stage IV emissions rules, primarily through the use of DEF/Adblue.
The new machine also introduces revised styling and accommodation which are likely to be seen on future updated Solis models. Lift capacity is 4,400kg and there is a 540/540E rpm PTO. For those concerned about compactness, turning circle is 11.2m, height 2,720mm and width 2,074mm.
Massey Ferguson’s new 6700 S range is headed by what’s claimed to be the industry’s first 200hp four-cylinder tractor. That’s the maximum output with engine power management (PTO/transport boost) on the 6718S, which is the flagship of a six-strong range, all powered by a 4.9 litre, four-cylinder AGCO Power engine.
The 6718 S develops maximum power at 2,000rpm and maximum torque at 1,500rpm. A new active mechanical cab suspension is claimed to enhance operator comfort, while rear linkage capacity rises by 1t to 9,600kg on Dyna-VT models. Wheelbase is 2.67m and turning radius 4.75m.
Meanwhile, MF says its C3000 colour touchscreen terminal will be supplied and installed free in the new factory-fitted Auto-Guide 3000 technology package option for its tractors if ordered by 31 December. MF also used EIMA to unveil a new line of TH telehandlers, powered by Doosan engines.
Following its launch at last year’s Agritechnica, EIMA marked a big expansion in the product offering shown by newly founded Chinese-owned/Italian-based manufacturer Arbos.
The company’s parent, Chinese firm Lovol, has added to the 100-260hp at last year’s Agritechnica. Lovol has purchased Italian compact tractor maker Goldoni, and has integrated some of its machines into the base of the Arbos tractor line. Larger Arbos agricultural tractors are to be made at the former Goldoni factory.
The new firm also used EIMA to reveal “full-liner” plans, showing re-liveried precision drills, sprayers, twin-disc fertiliser spreaders and min/no-till drills from sister firm Matermacc, which is also owned by Lovol. There was no news yet, though, of its planned combine range.
While its initial market focus is on Italy, where the revived brand name was formerly used by a now-defunct combine maker, and on production for China, Arbos has plans to create subsidiaries or appoint importers across all key European countries.
New Holland also used EIMA to unveil an S tractor, its new T7.165 S, being a stripped-down economy version of the standard model, equipped as standard with the entry-level Range Command semi-powershift transmission, simpler seating and a basic worklight package.
New Holland’s stand, meanwhile, was replete with a number of Kongskilde tillage and grass implements, following the recent purchase of the equipment firm by CNH Industrial. At a press conference, it was revealed that the Kongskilde brand and dealer arrangements will continue for the foreseeable future, but New Holland will also benefit from reliveried implements being added to its line.
SHARING OPTIONS: