Following the successful launch of its trailing shoe range last year, Fleming Agri Products is returning to the Ploughing to show both the 7.5m and the 9.2m models. Both models are eligible under TAMS III grant aid.

The Fleming Agri trailing shoe is fitted with a patent-pending cantilever lift system, which gives maximum clearance for transport and headland management. The bi-lateral float mechanism ensures constant contact with the ground, even in undulating ground conditions, for an even slurry application. The Fleming Agri trailing shoe has a reduced spacing of 250mm between the shoes to provide a more even distribution. It is bracket mounted for better weight distribution. Also on the stand will be the ST2000C, which is a 2000-gallon vacuum tanker, fitted with a full commercial, cranked axle. All Fleming tankers are welded inside and out, and they are also painted internally and externally for better anti-corrosion protection.

New roller

Fleming Agri will have a new product launch at the event, namely a 10ft hydraulic lifting roller. It has a 3m working width and an overall transport width of 3.1m. It has a 12mm barrel with 30-inch drum, fitted with a 75mm steel shaft. Also on display will be the AR10, which is a 10ft aerator, with a fully galvanised frame. It is fitted with an adjustable angle rotor and 48 blades fitted in a spiral for smooth aeration.

Some other products that will be on display include the MS1000 muck spreader with a reinforced 5mm body, welded internally and externally, and 6mm reinforced end plates. It has a capacity of 9.5 cubic yard widths, heavy duty one inch duplex drive chain and a galvanised, hydraulic lid for ease of loading. There will also be a range of both three-point linkage and loader-mounted, bale-handling equipment on display, with a machine to suit most applications.