Toys motif created by stencilling. Credit: Carol Dunne.
You could use another colour to paint edges on the toy box or any moulding to highlight them. Credit: Carol Dunne.
Joanne Condon of Kyle Lane with her upcycled retro style toy box. Credit: Carol Dunne.
Apply your “toys” template. With the bristly brush, dab the paint in the stencil until covered in an even coat , and leave to fully dry. Credit: Carol Dunne.
Paint an even coat of PVA glue onto the paper you have chosen and allow the glue to soak in for a minute. Credit: Carol Dunne.
Detail shot of inside of upcycled toy box. Credit: Carol Dunne.
Make tidying up tractors and teddies a lot more fun (and stylish) with this retro-style toy box, perfect for a child’s bedroom. This project uses basic painting, stencilling and decoupage techniques.
Materials needed
• Medium or fine-grain sandpaper.
• A cloth.
• Water-based primer (I used Little Greene’s acrylic primer and undercoat).
• Water-based paint ( I used Little Greene’s intelligent eggshell, turquoise blue 93, loft white 222 and baked cherry 14).
• Paint brush/paint brush for glue.
• Bristly brush for stencilling.
• Blade.
• Marker.
• Masking tape.
• PVA glue.
• Old Beano magazines/map paper.
Method
In a circular motion, sand the toy box with medium/fine-grain sandpaper.
Wipe off any sanding dust with a dry cloth.
Prime with a water-based primer and undercoat.
Paint in a colour of your choice, with two/three coats of paint, allowing them to dry between each coat.
Print out the templates and trace out each section on a piece of heavy card or acetate.
With a sharp blade, cut out each colour on a separate acetate. Starting with Template 1 first, position with masking tape and paint in a light colour (I used Little Greene’s loft white). Allow to fully dry (you might need two coats).
Optional: You could use another colour to paint edges on the toy box, or any moulding to highlight them (I used Little Greene’s baked cherry).
Apply Template 2. With the bristly brush, dab the paint (I used Little Greene’s turquoise blue) in the stencil until it’s covered with an even coat and leave it to fully dry. Fill in the gap on the “O” with a small brush.
Optional: You can also put a drop shadow on the “toys” lettering, to make it stand out even more (Template 3).
For the inside: Paint an even coat of PVA glue onto the paper you have chosen and allow the glue to soak in for a minute.
With a sponge or your hand, start pressing the page along one end, while you have the rest of the page in your hand, and rub the page onto the surface evenly so as not to cause any air bubbles.
Repeat step 10 until the inside of the toy box is covered.
Leave the lid open on the toy box until the inside is fully dry.
When everything is dry, you can distress the outside with some sandpaper around edges.
Register for free to read this story and our free stories.
This content is available to digital subscribers and loyalty code users only. Sign in to your account, use the code or subscribe to get unlimited access.
The reader loyalty code gives you full access to the site from when you enter it until the following Wednesday at 9pm. Find your unique code on the back page of Irish Country Living every week.
CODE ACCEPTED
You have full access to the site until next Wednesday at 9pm.
CODE NOT VALID
Please try again or contact support.
Upcycling a toy box in retro style
Level: Intermediate
Make tidying up tractors and teddies a lot more fun (and stylish) with this retro-style toy box, perfect for a child’s bedroom. This project uses basic painting, stencilling and decoupage techniques.
Materials needed
• Medium or fine-grain sandpaper.
• A cloth.
• Water-based primer (I used Little Greene’s acrylic primer and undercoat).
• Water-based paint ( I used Little Greene’s intelligent eggshell, turquoise blue 93, loft white 222 and baked cherry 14).
• Paint brush/paint brush for glue.
• Bristly brush for stencilling.
• Blade.
• Marker.
• Masking tape.
• PVA glue.
• Old Beano magazines/map paper.
Method
In a circular motion, sand the toy box with medium/fine-grain sandpaper.
Wipe off any sanding dust with a dry cloth.
Prime with a water-based primer and undercoat.
Paint in a colour of your choice, with two/three coats of paint, allowing them to dry between each coat.
Print out the templates and trace out each section on a piece of heavy card or acetate.
With a sharp blade, cut out each colour on a separate acetate. Starting with Template 1 first, position with masking tape and paint in a light colour (I used Little Greene’s loft white). Allow to fully dry (you might need two coats).
Optional: You could use another colour to paint edges on the toy box, or any moulding to highlight them (I used Little Greene’s baked cherry).
Apply Template 2. With the bristly brush, dab the paint (I used Little Greene’s turquoise blue) in the stencil until it’s covered with an even coat and leave it to fully dry. Fill in the gap on the “O” with a small brush.
Optional: You can also put a drop shadow on the “toys” lettering, to make it stand out even more (Template 3).
For the inside: Paint an even coat of PVA glue onto the paper you have chosen and allow the glue to soak in for a minute.
With a sponge or your hand, start pressing the page along one end, while you have the rest of the page in your hand, and rub the page onto the surface evenly so as not to cause any air bubbles.
Repeat step 10 until the inside of the toy box is covered.
Leave the lid open on the toy box until the inside is fully dry.
When everything is dry, you can distress the outside with some sandpaper around edges.
If you would like to speak to a member of our team, please call us on 01-4199525.
Link sent to your email address
We have sent an email to your address. Please click on the link in this email to reset your password. If you can't find it in your inbox, please check your spam folder. If you can't find the email, please call us on 01-4199525.
ENTER YOUR LOYALTY CODE:
The reader loyalty code gives you full access to the site from when you enter it until the following Wednesday at 9pm. Find your unique code on the back page of Irish Country Living every week.
SHARING OPTIONS