Alstrong Ltd will exhibit its full Auctus one-pass reseeding range at the FTMTA Farm Machinery Show.
Visitors will see the trailed Auctus T and the mounted Auctus M side by side.
Both machines prepare a seedbed, aerate, sow and consolidate in a single pass, working into ploughed ground, burnt-off leys or existing pasture.
The Auctus takes its name from the Latin word for growth. Alstrong says its aim is simple: better grass at lower cost, with fewer passes and less fuel than a conventional plough-and-till reseed.
Auctus T – heavy-duty trailed option
The Auctus T has a 3m working width and weighs 4.5t dry, rising to 5.3t with water ballast for hard ground. Alstrong recommends a minimum of 140hp.
Up front, two offset rows of hydraulically adjustable sprung ripper paddles level and open the surface. A spiked drum carrying 60 hardened 80mm aeration blades then works the root zone, with a free-wheeling revolving scraper keeping it clean in sticky conditions.
Seed is delivered by the Kildare-built Doyle Vario pneumatic seeder, which handles rates from 1kg/ha for fine seed up to 80kg/ha for grass, before hydraulically controlled rear tines finish the job. A soft-ride axle makes for comfortable road transport between jobs.
Auctus M – compact mounted option
The Auctus M brings the same one-pass system to the three-point linkage, in a 3m working width. It weighs 2.5t and can carry a further 700kg of water ballast where extra penetration is needed.
Its headstock lets the machine move freely between tractors of different tyre sizes, with height set simply on the lift arms.

The Auctus M shares the T’s hydraulically adjustable front paddles, 60-blade aeration drum and Doyle pneumatic seeder. Since 2025, it has also carried a rear consolidation skid, firming soil around the seed for faster, more even establishment.
Its lighter, mounted design makes it a natural fit for farmers reseeding their own ground with mid-sized tractors.


