For livestock farmers, some of the more monotonous tasks during the winter months involve the spreading of straw for bedding cattle and the feeding out of silage to cattle and sheep.
There is an easier way of doing it than reaching for the hand-fork and one such method is the use of a mechanical straw chopper or straw blower.
These are now becoming increasingly popular on livestock farms to reduce the workload attached to bedding animals.
They are also potentially safer, as handling dusty straw is a risk factor for the development of farmer's lung disease.
Another factor some users point to is that straw blowers and choppers can use less straw than manually spreading straw, leading to potential savings in the amount of straw being used.
How do they work?
In the main, there are three different types of straw choppers and straw processors available on the market.
Some are loader-mounted and operated hydraulically, while others are rear-mounted and PTO driven. The third type is trailed and PTO driven.

Belts on the floor feed the bale into a rotor which then blows the material out the front, usually through a cab-controlled chute.
At the FTMTA Farm Machinery Show in Punchestown this week, both McHale and Teagle had mounted and trailed straw blowers on display.
Teagle
One of the Teagle models on display was the high-spec straw processor, which Tom Teagle from Teagle said is capable of chopping straw to a fine 30mm length, suitable for use in total mixed rations.
He says an increasing number of farmers across Europe and the US are using straw processors to chop the straw, which he says is more efficient and effective than using the diet feeder to chop it finely.

However, Tom says that for most livestock farmers the most common machine sold for bedding animals or feeding out silage is the Teagle 8200 series.

This is a trailed machine capable of holding two round bales or one big square bale and has an 80hp power requirement.
Cost wise, this machine has a list price of €22,895 plus VAT.
McHale
McHale machinery had two straw choppers/blowers on display at the FTMTA show, a mounted and trailed C460 machine.
The trailed machine has a power requirement of 80hp to 90hp and has 56 knives with the option of doubling to 112 knives.

Capable of spreading straw and feeding silage, the C460 is described by Eoin Clarke, marketing manager at McHale, as “the bread and butter of straw choppers”.
The list price of the trailed McHale C460 comes in at €20,600 plus VAT and can hold two round bales or one big square bale.






