The Lotus range includes the mounted six-rotor 770, the trailed eight-rotor 1020T and the trailed 10-rotor 1250T.
ADVERTISEMENT
A popular machine in Ireland in its previous Lely livery, Fendt exhibited its version of the Lotus tedder at Agritechnica last week. The new range is made up of three models, with working widths from 7.70m up to 12.50m.
The range includes the mounted six-rotor 770, the trailed eight-rotor 1020T and the trailed 10-rotor 1250T. Both trailed machines have a solid drawbar. A fitted frame with a back-set pivot point helps stabilise the machine and offers manoeuvrability. The drive shafts are equipped with maintenance-free double cross-joints. Rotor plates are fitted with the known flat tine arms that were fitted on the Lely machines.
The Fella-derived Twister tedder range sees the addition of a new top-end flagship model, the Twister 11010 DN. The 10-rotor 11010 DN offers a working width of 10.72m. It has an automatic safety switch-off with integrated free wheel which cuts the power if the machine is lifted above the headland setting. It can be equipped with a hydraulic swath cloth.
ADVERTISEMENT
Register for free to read this story and our free stories.
This content is available to digital subscribers and loyalty code users only. Sign in to your account, use the code or subscribe to get unlimited access.
The reader loyalty code gives you full access to the site from when you enter it until the following Wednesday at 9pm. Find your unique code on the back page of Irish Country Living every week.
CODE ACCEPTED
You have full access to the site until next Wednesday at 9pm.
CODE NOT VALID
Please try again or contact support.
A popular machine in Ireland in its previous Lely livery, Fendt exhibited its version of the Lotus tedder at Agritechnica last week. The new range is made up of three models, with working widths from 7.70m up to 12.50m.
The range includes the mounted six-rotor 770, the trailed eight-rotor 1020T and the trailed 10-rotor 1250T. Both trailed machines have a solid drawbar. A fitted frame with a back-set pivot point helps stabilise the machine and offers manoeuvrability. The drive shafts are equipped with maintenance-free double cross-joints. Rotor plates are fitted with the known flat tine arms that were fitted on the Lely machines.
The Fella-derived Twister tedder range sees the addition of a new top-end flagship model, the Twister 11010 DN. The 10-rotor 11010 DN offers a working width of 10.72m. It has an automatic safety switch-off with integrated free wheel which cuts the power if the machine is lifted above the headland setting. It can be equipped with a hydraulic swath cloth.
If you would like to speak to a member of our team, please call us on 01-4199525.
Link sent to your email address
We have sent an email to your address. Please click on the link in this email to reset your password. If you can't find it in your inbox, please check your spam folder. If you can't find the email, please call us on 01-4199525.
ENTER YOUR LOYALTY CODE:
The reader loyalty code gives you full access to the site from when you enter it until the following Wednesday at 9pm. Find your unique code on the back page of Irish Country Living every week.
SHARING OPTIONS