Smyth Trailers is set to unveil its latest generation of Supercube at the FTMTA Farm Machinery Show, bringing a new level of comfort and safety, thanks to IsoBus integration automation.
Some notable additions to this trailer include IsoBus electro-hydraulic steering, automatic tipping and lowering functions, air suspension, on-board weighing system and more, all controlled directly through the IsoBus terminal located in the cab of the tractor.
With the new system, operators can monitor and control functions including electro-hydraulic steering, live load weight, automatic tipping and lowering, tip-angle control for low buildings, reversing and work lights, hydraulic front mesh and air suspension controls.
Supplied by Distag QCS, Smyth explained that the Hydac ADS system uses hydraulic pressure to control the steering rams on the trailers axles, turning them precisely as required.
Thanks to IsoBus integration and power-beyond connections, Smyth says there is now no need for any mechanical linkage between the tractor and trailer. This removes the traditional steering arm along the drawbar.
On positive steering trailers, protective tubing is fitted to shield this steering arm from damage, but with ADS, there is no steering arm at all. This means the tractor can turn tighter to the drawbar, while still maintaining the same consistent steering angles across all axles.

The ADS system offers three operating modes, all controlled through the IsoBus display in the tractor cab. The first is automatic mode (A), where the operator simply drives as normal in both forward and reverse, while the ADS system manages all steering functions.
Using speed and directional sensors on the steering axles, the system continuously adjusts steering. As speed increases, the maximum steering angle is reduced to for stability and safe handling.
Next up is manual mode (M), which allows the operator to override the system and control the axles steering directly. The IsoBus interface displays left and right controls, allowing the operator to adjust the steering angle (from 0° to 12°). If speed exceeds 8km/h, the system automatically reverts to A mode for safety.
The third and final option is crab-steer mode (C). Smyth says this is ideal for tri-axle setups, with C mode allowing both steering axles to turn in the same direction, enabling the trailer to move laterally. This helps reduce soil compaction by spreading the load.
Smyth says it is also useful in tight yards or gateways to reposition the trailer without risking damage due to tail swing.
The system determines the tractor’s movement using gyroscope sensors mounted on the steering axle kingpins. Smyth says these sensors communicate with the trailer’s onboard ECU to calculate both direction and steering angle, ensuring smooth operation in both forward and reverse.

All additional elements of the ADS system are located inside a small, waterproof box.
The new automatic tipping sequence is designed to make unloading quicker, easier and safer.
By pressing the tipping function button on the IsoBus display, the reverse lights will automatically turn on. By holding down the tipping function for three seconds, the system will begin the automatic tipping sequence. This includes tipping the trailer, opening the tail door and releasing the air from the air suspension for extra stability.
At the touch of a button on the touchscreen, the trailer then automatically returns to its transport position. These functions can be manually overridden if need be.
Smyth Trailers will also showcase other models from its agricultural and construction trailer ranges including an SC65 quad axle silage trailer, tri-axle power-tilt dump trailer and a tri-axle auto-tilt dump trailer.


