Today, almost all on farm investments are centred around reducing labour, saving time and increasing the level of safety. The plastic/net retaining bale shear is one piece of machinery that has proved a popular investment, allowing time savings of up to 50% and 60%
over other traditional bale feeding methods.
This combined with a 60% TAMS III grant aid has resulted in bale shears being a hugely popular farm investment over the past number of years. These attachments are grant-aided as part of the Farm Safety Capital Investment Scheme (FSCIS).
As part of the recently reviewed TAMS reference costs, grant aid on plastic retaining bale shear attachments has increased by 10% from €3,535 to €3,888.50, an increase of €353.50.
This means that a successful applicant will be able to claim back €2,333.10 off the buying price of a new machine. The updated reference cost will be in place for all eligible applications submitted in tranche 10.
Increasing safety, saving time
Aside from time savings, the increased safety element of not having to leave the tractor or loader cab is another huge benefit to a bale shears, not to mention the added benefit of staying clean and dry throughout the dark and wet days associated with winter feeding season.
These types of machines tend to retain the film using two methods, either through a hook system or a pinching system. The Irish Farmers Journal understands that these two systems are patented by two Irish manufacturers, while other manufacturers then use the concept under licence or by paying a royalty fee.
Göweil
Göweil offers its round bale slicer (RBS), which has been designed for use with either the tractor’s three-point linkage or via a telehandler or front-end loader. The RBS uses eight hooks to hold and retain the film and net while the bale is being cut.
Göweil believes that its RBS model can better handle mishaped bales as it catches film/net from the top of the bale.
The hooks are operated using a hydraulic sequencing valve, which engages and disengages as the blade is opened and closed. The full operation is done using one double-acting third service.
As standard, the RBS encompasses five 1m reinforced tines and a double-edged serrated Hardox cutting blade.
Weighing in at 440kg, the unit is designed to handle 1.4m and 1.5m round bales but can’t be used to feed out pit silage. The Cooney Furlong Machinery Company in Enniscorthy, Co Wexford imports and distributes the Göweil range.
Fitted with brackets to suit, the unit is priced at €4,270 plus VAT.
Tanco
Since the launch of the i70 bale shear at the National Ploughing Championships in 2009, Tanco has become one of the major contenders on the bale shear market.
The Carlow-based manufacturer further developed the concept in 2013, and later launched the i73. This had the added capability of handling slighter larger bales.
The i73 is designed to handle round bales of up to 1.55m in diameter. Tanco uses a gripping jaw-like mechanism that holds the plastic without piercing it.
Tanco has been in the bale shear market since 2009.
Once the bale is discharged and the rams have been fully opened, the sequence valve will release the pressure from the clamp holding the plastic.
The i73 weighs in at 380kg (excluding brackets) and is designed to only handle round bales. The machine also comes with the option of a quick-attach bucket which costs an additional €1,160 plus VAT. Tanco also manufactures an i75 Multishear, which can be used to feed out bales and pit silage.
This weighs in at 730kg (without brackets). A range of bolt-on brackets are available for both.
The i73 is priced at €4,670 plus VAT, while the i75 is €7,920 plus VAT.
Hustler
Hustler, the New Zealand-based machinery manufacturer, offers one bale shears model with a film-retaining device, namely the LX190. The LX190 is a sole bale slice, which uses four hooks to retain the film/net.
These hooks are operated through a hydraulic sequencing valve which engage and disengage as the blade is opened and closed.
Using four-inch rams, the unit is designed to handle 4ft bales with ease.
The LX190 weighs in at 469kg and is priced at €3,577 plus VAT including brackets.
Johnston Farm Equipment Ltd, the well-known Massey Ferguson dealer in Co Longford, is responsible for the importation and distribution of the full Hustler equipment range in Ireland. 
The LX190 uses four hooks to capture and retain the net/film.
Shearman
Fastparts, a division of Farmhand, the well-known Irish importer of Krone, Amazone, Quicke, Zuidberg and APV, distributes the Shearman 1700 bale shears through its dealer network.
The 1.7m Shearman 1700 comes fitted with six tines and is designed to retain film and net using four hooks instead of a jaw-like clamping mechanism.
The Shearmann 1700 is equipped as standard with six tines.
This operates via a hydraulic sequencing valve; therefore, only one double-acting service is required.
Unlike its competitors, it is fitted with bolt-on knife sections for easy replacement.
The Shearman is fitted as standard with weld-on euro brackets, while other brackets are available. The unit weighs in at 540kg and is priced at €3,550 plus VAT.
Cashels Engineering
Mayo-based Cashels Engineering offers its 4ft and 5ft bale cutter and film catcher models. The larger is more suited to export markets where larger diameter bales are more common. Cashels’ design includes a curved frame for a larger opening area to handle bales up to 1.35m (4ft model) and 1.6m (5ft model) in diameter.
Cashels offers an optional bucket attachment which is retained using a spring loaded pin.
The firm uses a patented film/net-retaining mechanism with four hooks mounted in a single row across the machine. These hooks are operated using a hydraulic sequencing valve, engaging and disengaging as the blade is opened and closed.
The serrated cutting blade is double-edged and made using Hardox steel. An optional meal bucket attachment is available at a price of €1,250 plus VAT. This is retained on the tines via a spring-loaded pin. The option of fitting additional tines on the outer sides is also available. Excluding brackets, the 4ft model weighs 400kg, while the larger 5ft model weighs 460kg.
A range of bolt-on brackets is available. The 4ft model starts at €3,900 plus VAT.
Abbey
In recent years, Abbey Machinery has ventured into the bale shear market. The machine uses a floating clamp design to retain both plastic and net.
Once a bale has been picked up, the floating clamp adjusts as the bale is gripped and cut, maintaining even pressure and improving handling of film/net In terms of operation, the shears use a hydraulic sequencing valve, meaning that once the shears are closed, oil is diverted via the sequencing valve to engage the plastic retaining clamp.
Once the shear has fully opened, the clamp then releases the net/film.
Abbey uses a floating clamp design which hinges on the same frame as the cutting blade.
The unit is equipped with five tines as standard and weighs 440kg excluding brackets. Euro brackets are fitted as standard however a range of brackets options are available on request. Its priced at €4,500 plus VAT.
ProDig
ProDig Attachments offers three options for feeding silage bales with film/net-retaining devices. These include the Pro Slice, Megabite shear grab and the Shear Genius shear bucket.
The Pro Slice is a standalone bale shears for those only feeding bales, and in need of a lightweight solution.
The Pro Slice is compatible with all bales from 1.2m (4ft) to 1.5m (5ft). As standard, the unit is fitted with five 985mm (39in) tines but is bushed for an additional two.
The Prodig Pro Slice weighs 452kg.
The device uses three pairs of jaw-like clamps and works via a hydraulic sequencing valve. ProDig uses Hardox and Domex plate steel in its construction.
The Pro Slice weighs 452kg and is priced at €4,024 plus VAT (including brackets). ProDig also offers its Mega Bite shear grab and Shear Genius shear bucket, both of which are fitted with retaining devices and therefore double up as a bale shears.
The Shear Genius is available in widths from 1.5m to 2.5m. Starting with the 1.5m GS 1500, it weighs 720kg and is priced at €6,224 plus VAT including euro brackets.
Meanwhile, the 1.5m MB 1500 Megabite weighs 625kg and is priced at €6,224 plus VAT including euro brackets. Wider working widths of up to 2.2m and 2.5m are available.
Keltec
Manufacturing bale shears since 2008, Keltec Engineering’s design works in a different fashion to most other manufacturers. The firm’s shear pinches and holds the bale’s wrap and net on the top of the bale, while the cutting blade slices from the bottom upwards.
Once the bale is cut within 18in of the top frame, the sequencing valve is initiated, triggering the grippers to close. Due to the upwards fashion in which it cuts the bale, it’s probably the best suited if feeding into a diet feeder. As the bale is being sliced, the silage falls away from the wrap and net.
Keltec's bale slice cuts the bale from the bottom upwards.
The machine comes with the option of a meal feeding bucket, which costs an additional €950 plus VAT.
It features a double-edged Hardox cutting blade and seven reinforced tines. The unit’s operation is controlled using a double-acting valve. Weighing in at 480kg (without brackets), it is priced at €3,937 plus VAT and comes with bolt-on brackets to suit. Keltec also offers a combi shear with a plastic-retaining device, which can be used to feed both bales and pit silage.
It uses the same plastic-retaining device, hardox tines and features a hardened steel cutting edge. It is available in two sizes. The 5ft (1.52m) models weighs in at 745kg and is priced at €6,162 plus VAT. The 6ft 4in (1.93m) version weighs in at 800kg and is priced at €6,800 plus VAT.
Scully
Best known for its bale and livestock trailers, Kerry engineering company Scully also offers a bale shears. Fabricated using 100 x 8mm box section, Scully uses five 39in stone fork tines.
The unit retains the film and net using six hooks, which operate via a hydraulic sequencing valve. With an opening width of 1.5m, the unit features welded on hardened cutting edge.
The Scully shears retains net/film using six hooks.
Scully said all units are shot-blasted before receiving two coats of two-pack paint. It weighs in at 480kg and is priced at €3,900 plus VAT. On this season’s shears, Scully is offering the option of a meal bucket that can be supplied with the unit at additional cost of €1,100 plus VAT.
IEP
Carlow-based manufacturer Irish Engineering Products (IEP) has been building bale shears since 2013. Its film/net-retaining device comprises four jaw-like hooks, which are operated through a hydraulic sequencing valve. When the shears are closed, oil is diverted via the sequencing valve and the hooks catch the film/net. Once the shears are opened fully, oil is diverted and the clamp opens.
IEP also offers an optional bucket attachment.
A bucket attachment is available on order for the 1.45m shears. A range of bolt-on/welded brackets is available to suit all headstocks. The IEP bale shears weighs in at 430kg and is priced at €3,414 plus VAT.
Rohan
Rohan Engineering has been manufacturing its bale slice for over a decade. The company claims to be the only manufacturer that offers a floating clamp, designed to handle irregular-shaped round bales.
Once a bale has been picked up, the floating clamp hinges on the same frame as the cutting blade, meaning both move parallel to one another. The clamp is loaded using a hydraulic sequencing valve, which engages and disengages as the blade is opened and closed.
This machine is designed for feeding 4x4 and 5x4 round bales.
Rohan uses a floating clamp style retaining mechanism.
Rohan uses a double-edged Hardox cutting blade on both machines. An optional bucket attachment is also available. As standard, the unit is fitted with five tines but is bushed for up to seven. It weighs in at 400kg (excluding brackets) and is supplied with brackets to suit any headstock. It is priced at €3,660 plus VAT. Rohan also offers a combi unit for those after a hybrid pit and bale feeding option. It weighs in at 600kg and costs €5,280 plus VAT.
Nugent
Nugent Engineering, based in Dungannon, Co Tyrone, offers its bale cutter and wrap catcher through its broad dealer network.
It features a curved frame for a larger opening angle to handle 4x4 round bales of silage. Across the width of the machine are Hardox knife sections and six tines, as standard.
The Nugent bale slice is equipped with six tines as standard.
The film/net-retaining device comprises two pairs of jaw-like hooks, which are operated through a hydraulic sequencing valve. When the shears are closed, oil is diverted via the sequencing valve, engaging the hooks to catch the film/net.
Once the frame has been fully opened, the hooks release and let go of the film/net. A range of bolt-on brackets are available to suit all headstocks. The Nugent bale shears weighs approximately 373kg and is priced at €3,230 plus VAT.
Talex
Talex is another Polish company, probably best known in Ireland for its mulchers and attachments.
Its bale shears is fitted with six heavy-duty stone fork tines and is designed to retain film and net using four hooks, which operate via a hydraulic sequencing valve.
The Talex bale shear uses replaceable cutting blades.
With an opening width of 1.5m, the Talex machine is fitted with seven replaceable cutting blades, which are riveted into place for easy changing.
It weighs in at 400kg and has a 1,000kg load capacity. Available on any brackets, it is priced at €3,000 plus VAT.
Sonarol
Polish manufacturer Sonarol offers its three-in-one combi cutter, which it says acts as a silage cutter, a bale shear, and a bucket for bulk materials. Very similar to some of the Irish designs, it uses a hydraulically operated clamp to hold the plastic film/net of the bale being cut.
The Sonarol unit weighs 600kg.
The 1.6m shears weighs 600kg (bucket is an extra 120kg). Claiming to be made from high-strength steel preserved, the kit is finished in powder coating. It can be fitted with a varying number of forged replaceable tines, while Sonarol claims the scoop blade is made of Hardox high wear resistance steel. It is priced at €3,252 plus VAT.
Stekro
Stekro is a Polish manufacturer of farm machinery. Its bale shears is quite similar to many of the others listed. It is fitted with seven tines and is designed to retain film and net using four hooks, which operate via a hydraulic sequencing valve.
Stekro uses four hooks to retain net/film.
With an opening width of 1.3m, its available in widths of 1.7m to 1.9m and features a tine length of 1,000mm.
It can be equipped with any bracket as standard and weighs in at 450kg. Coming in a powder-coated finish, the unit is priced at €2,845 plus VAT.
Today, almost all on farm investments are centred around reducing labour, saving time and increasing the level of safety. The plastic/net retaining bale shear is one piece of machinery that has proved a popular investment, allowing time savings of up to 50% and 60%
over other traditional bale feeding methods.
This combined with a 60% TAMS III grant aid has resulted in bale shears being a hugely popular farm investment over the past number of years. These attachments are grant-aided as part of the Farm Safety Capital Investment Scheme (FSCIS).
As part of the recently reviewed TAMS reference costs, grant aid on plastic retaining bale shear attachments has increased by 10% from €3,535 to €3,888.50, an increase of €353.50.
This means that a successful applicant will be able to claim back €2,333.10 off the buying price of a new machine. The updated reference cost will be in place for all eligible applications submitted in tranche 10.
Increasing safety, saving time
Aside from time savings, the increased safety element of not having to leave the tractor or loader cab is another huge benefit to a bale shears, not to mention the added benefit of staying clean and dry throughout the dark and wet days associated with winter feeding season.
These types of machines tend to retain the film using two methods, either through a hook system or a pinching system. The Irish Farmers Journal understands that these two systems are patented by two Irish manufacturers, while other manufacturers then use the concept under licence or by paying a royalty fee.
Göweil
Göweil offers its round bale slicer (RBS), which has been designed for use with either the tractor’s three-point linkage or via a telehandler or front-end loader. The RBS uses eight hooks to hold and retain the film and net while the bale is being cut.
Göweil believes that its RBS model can better handle mishaped bales as it catches film/net from the top of the bale.
The hooks are operated using a hydraulic sequencing valve, which engages and disengages as the blade is opened and closed. The full operation is done using one double-acting third service.
As standard, the RBS encompasses five 1m reinforced tines and a double-edged serrated Hardox cutting blade.
Weighing in at 440kg, the unit is designed to handle 1.4m and 1.5m round bales but can’t be used to feed out pit silage. The Cooney Furlong Machinery Company in Enniscorthy, Co Wexford imports and distributes the Göweil range.
Fitted with brackets to suit, the unit is priced at €4,270 plus VAT.
Tanco
Since the launch of the i70 bale shear at the National Ploughing Championships in 2009, Tanco has become one of the major contenders on the bale shear market.
The Carlow-based manufacturer further developed the concept in 2013, and later launched the i73. This had the added capability of handling slighter larger bales.
The i73 is designed to handle round bales of up to 1.55m in diameter. Tanco uses a gripping jaw-like mechanism that holds the plastic without piercing it.
Tanco has been in the bale shear market since 2009.
Once the bale is discharged and the rams have been fully opened, the sequence valve will release the pressure from the clamp holding the plastic.
The i73 weighs in at 380kg (excluding brackets) and is designed to only handle round bales. The machine also comes with the option of a quick-attach bucket which costs an additional €1,160 plus VAT. Tanco also manufactures an i75 Multishear, which can be used to feed out bales and pit silage.
This weighs in at 730kg (without brackets). A range of bolt-on brackets are available for both.
The i73 is priced at €4,670 plus VAT, while the i75 is €7,920 plus VAT.
Hustler
Hustler, the New Zealand-based machinery manufacturer, offers one bale shears model with a film-retaining device, namely the LX190. The LX190 is a sole bale slice, which uses four hooks to retain the film/net.
These hooks are operated through a hydraulic sequencing valve which engage and disengage as the blade is opened and closed.
Using four-inch rams, the unit is designed to handle 4ft bales with ease.
The LX190 weighs in at 469kg and is priced at €3,577 plus VAT including brackets.
Johnston Farm Equipment Ltd, the well-known Massey Ferguson dealer in Co Longford, is responsible for the importation and distribution of the full Hustler equipment range in Ireland.
The LX190 uses four hooks to capture and retain the net/film.
Shearman
Fastparts, a division of Farmhand, the well-known Irish importer of Krone, Amazone, Quicke, Zuidberg and APV, distributes the Shearman 1700 bale shears through its dealer network.
The 1.7m Shearman 1700 comes fitted with six tines and is designed to retain film and net using four hooks instead of a jaw-like clamping mechanism.
The Shearmann 1700 is equipped as standard with six tines.
This operates via a hydraulic sequencing valve; therefore, only one double-acting service is required.
Unlike its competitors, it is fitted with bolt-on knife sections for easy replacement.
The Shearman is fitted as standard with weld-on euro brackets, while other brackets are available. The unit weighs in at 540kg and is priced at €3,550 plus VAT.
Cashels Engineering
Mayo-based Cashels Engineering offers its 4ft and 5ft bale cutter and film catcher models. The larger is more suited to export markets where larger diameter bales are more common. Cashels’ design includes a curved frame for a larger opening area to handle bales up to 1.35m (4ft model) and 1.6m (5ft model) in diameter.
Cashels offers an optional bucket attachment which is retained using a spring loaded pin.
The firm uses a patented film/net-retaining mechanism with four hooks mounted in a single row across the machine. These hooks are operated using a hydraulic sequencing valve, engaging and disengaging as the blade is opened and closed.
The serrated cutting blade is double-edged and made using Hardox steel. An optional meal bucket attachment is available at a price of €1,250 plus VAT. This is retained on the tines via a spring-loaded pin. The option of fitting additional tines on the outer sides is also available. Excluding brackets, the 4ft model weighs 400kg, while the larger 5ft model weighs 460kg.
A range of bolt-on brackets is available. The 4ft model starts at €3,900 plus VAT.
Abbey
In recent years, Abbey Machinery has ventured into the bale shear market. The machine uses a floating clamp design to retain both plastic and net.
Once a bale has been picked up, the floating clamp adjusts as the bale is gripped and cut, maintaining even pressure and improving handling of film/net In terms of operation, the shears use a hydraulic sequencing valve, meaning that once the shears are closed, oil is diverted via the sequencing valve to engage the plastic retaining clamp.
Once the shear has fully opened, the clamp then releases the net/film.
Abbey uses a floating clamp design which hinges on the same frame as the cutting blade.
The unit is equipped with five tines as standard and weighs 440kg excluding brackets. Euro brackets are fitted as standard however a range of brackets options are available on request. Its priced at €4,500 plus VAT.
ProDig
ProDig Attachments offers three options for feeding silage bales with film/net-retaining devices. These include the Pro Slice, Megabite shear grab and the Shear Genius shear bucket.
The Pro Slice is a standalone bale shears for those only feeding bales, and in need of a lightweight solution.
The Pro Slice is compatible with all bales from 1.2m (4ft) to 1.5m (5ft). As standard, the unit is fitted with five 985mm (39in) tines but is bushed for an additional two.
The Prodig Pro Slice weighs 452kg.
The device uses three pairs of jaw-like clamps and works via a hydraulic sequencing valve. ProDig uses Hardox and Domex plate steel in its construction.
The Pro Slice weighs 452kg and is priced at €4,024 plus VAT (including brackets). ProDig also offers its Mega Bite shear grab and Shear Genius shear bucket, both of which are fitted with retaining devices and therefore double up as a bale shears.
The Shear Genius is available in widths from 1.5m to 2.5m. Starting with the 1.5m GS 1500, it weighs 720kg and is priced at €6,224 plus VAT including euro brackets.
Meanwhile, the 1.5m MB 1500 Megabite weighs 625kg and is priced at €6,224 plus VAT including euro brackets. Wider working widths of up to 2.2m and 2.5m are available.
Keltec
Manufacturing bale shears since 2008, Keltec Engineering’s design works in a different fashion to most other manufacturers. The firm’s shear pinches and holds the bale’s wrap and net on the top of the bale, while the cutting blade slices from the bottom upwards.
Once the bale is cut within 18in of the top frame, the sequencing valve is initiated, triggering the grippers to close. Due to the upwards fashion in which it cuts the bale, it’s probably the best suited if feeding into a diet feeder. As the bale is being sliced, the silage falls away from the wrap and net.
Keltec's bale slice cuts the bale from the bottom upwards.
The machine comes with the option of a meal feeding bucket, which costs an additional €950 plus VAT.
It features a double-edged Hardox cutting blade and seven reinforced tines. The unit’s operation is controlled using a double-acting valve. Weighing in at 480kg (without brackets), it is priced at €3,937 plus VAT and comes with bolt-on brackets to suit. Keltec also offers a combi shear with a plastic-retaining device, which can be used to feed both bales and pit silage.
It uses the same plastic-retaining device, hardox tines and features a hardened steel cutting edge. It is available in two sizes. The 5ft (1.52m) models weighs in at 745kg and is priced at €6,162 plus VAT. The 6ft 4in (1.93m) version weighs in at 800kg and is priced at €6,800 plus VAT.
Scully
Best known for its bale and livestock trailers, Kerry engineering company Scully also offers a bale shears. Fabricated using 100 x 8mm box section, Scully uses five 39in stone fork tines.
The unit retains the film and net using six hooks, which operate via a hydraulic sequencing valve. With an opening width of 1.5m, the unit features welded on hardened cutting edge.
The Scully shears retains net/film using six hooks.
Scully said all units are shot-blasted before receiving two coats of two-pack paint. It weighs in at 480kg and is priced at €3,900 plus VAT. On this season’s shears, Scully is offering the option of a meal bucket that can be supplied with the unit at additional cost of €1,100 plus VAT.
IEP
Carlow-based manufacturer Irish Engineering Products (IEP) has been building bale shears since 2013. Its film/net-retaining device comprises four jaw-like hooks, which are operated through a hydraulic sequencing valve. When the shears are closed, oil is diverted via the sequencing valve and the hooks catch the film/net. Once the shears are opened fully, oil is diverted and the clamp opens.
IEP also offers an optional bucket attachment.
A bucket attachment is available on order for the 1.45m shears. A range of bolt-on/welded brackets is available to suit all headstocks. The IEP bale shears weighs in at 430kg and is priced at €3,414 plus VAT.
Rohan
Rohan Engineering has been manufacturing its bale slice for over a decade. The company claims to be the only manufacturer that offers a floating clamp, designed to handle irregular-shaped round bales.
Once a bale has been picked up, the floating clamp hinges on the same frame as the cutting blade, meaning both move parallel to one another. The clamp is loaded using a hydraulic sequencing valve, which engages and disengages as the blade is opened and closed.
This machine is designed for feeding 4x4 and 5x4 round bales.
Rohan uses a floating clamp style retaining mechanism.
Rohan uses a double-edged Hardox cutting blade on both machines. An optional bucket attachment is also available. As standard, the unit is fitted with five tines but is bushed for up to seven. It weighs in at 400kg (excluding brackets) and is supplied with brackets to suit any headstock. It is priced at €3,660 plus VAT. Rohan also offers a combi unit for those after a hybrid pit and bale feeding option. It weighs in at 600kg and costs €5,280 plus VAT.
Nugent
Nugent Engineering, based in Dungannon, Co Tyrone, offers its bale cutter and wrap catcher through its broad dealer network.
It features a curved frame for a larger opening angle to handle 4x4 round bales of silage. Across the width of the machine are Hardox knife sections and six tines, as standard.
The Nugent bale slice is equipped with six tines as standard.
The film/net-retaining device comprises two pairs of jaw-like hooks, which are operated through a hydraulic sequencing valve. When the shears are closed, oil is diverted via the sequencing valve, engaging the hooks to catch the film/net.
Once the frame has been fully opened, the hooks release and let go of the film/net. A range of bolt-on brackets are available to suit all headstocks. The Nugent bale shears weighs approximately 373kg and is priced at €3,230 plus VAT.
Talex
Talex is another Polish company, probably best known in Ireland for its mulchers and attachments.
Its bale shears is fitted with six heavy-duty stone fork tines and is designed to retain film and net using four hooks, which operate via a hydraulic sequencing valve.
The Talex bale shear uses replaceable cutting blades.
With an opening width of 1.5m, the Talex machine is fitted with seven replaceable cutting blades, which are riveted into place for easy changing.
It weighs in at 400kg and has a 1,000kg load capacity. Available on any brackets, it is priced at €3,000 plus VAT.
Sonarol
Polish manufacturer Sonarol offers its three-in-one combi cutter, which it says acts as a silage cutter, a bale shear, and a bucket for bulk materials. Very similar to some of the Irish designs, it uses a hydraulically operated clamp to hold the plastic film/net of the bale being cut.
The Sonarol unit weighs 600kg.
The 1.6m shears weighs 600kg (bucket is an extra 120kg). Claiming to be made from high-strength steel preserved, the kit is finished in powder coating. It can be fitted with a varying number of forged replaceable tines, while Sonarol claims the scoop blade is made of Hardox high wear resistance steel. It is priced at €3,252 plus VAT.
Stekro
Stekro is a Polish manufacturer of farm machinery. Its bale shears is quite similar to many of the others listed. It is fitted with seven tines and is designed to retain film and net using four hooks, which operate via a hydraulic sequencing valve.
Stekro uses four hooks to retain net/film.
With an opening width of 1.3m, its available in widths of 1.7m to 1.9m and features a tine length of 1,000mm.
It can be equipped with any bracket as standard and weighs in at 450kg. Coming in a powder-coated finish, the unit is priced at €2,845 plus VAT.
SHARING OPTIONS