Ballyfin Vintage & Veteran Club table quiz
Ballyfin Vintage & Veteran Club are holding their annual table quiz at the Deadmans Inn, Ballyfin on Friday 25 January at 8:30pm

Ballyfin Vintage and Veteran Club is holding its annual table quiz at the Deadmans Inn, Ballyfin, on Friday 25 January at 8:30pm.

An entry fee of €40 applies for a table of four or €10 per person, with spot prizes on the night. Proceeds in support of local causes.

For queries or any additional information on the Ballyfin Vintage and Veteran Club, please call Pat O’Connor at 087-782 4481.

Northern Ireland tractor market growth in 2018
Sales of new tractors in Northern Ireland increased by 7.4% in 2018.

UK registrations of new tractors (over 50hp) in January 2019 recorded a 10% drop compared with the same month in 2018, according to the latest figures from UK-based Agricultural Engineers Association (AEA).

The total number of new tractors registered in the UK in 2018 reached 12,102.

This was just under 1% higher than the total for 2017 and the largest annual figure in four years.

The biggest power segment in the UK market is now the 161 to 200hp category tractor, accounting for 20% of all new tractors sold there.

The market for bigger 241hp+ tractors showed the largest growth of almost 23%.

Northern Ireland

The AEA also reported that 491 new tractors were registered in Northern Ireland in 2018, up by 7.4% from 457 the previous year.

AGCO innovations win seven 2019 US engineering awards
AGCO Corporation have just scooped more ASABE awards than any other manufacturer.

AGCO Corporation, the owner of Massey Ferguson, Fendt and Valtra, has received seven AE50 Awards from the American Society of Agricultural and Biological Engineers (ASABE) in 2019, more than any other manufacturer.

Approximately 50 products, representing the best innovations in engineering and technology for agricultural, food and biological systems, are chosen for recognition each year by a panel.

This year’s winning products from AGCO include the Hesston by Massey Ferguson, WR9900 Series Windrower OptiRide Cab Suspension, Fendt IDEAL Combine, TerraGator C-Series High-Flotation Applicator, Amity Precision Shank Drill, GSI Z-Series Bins and Flexwave Technology, GSI Dry/Cool Portable Quiet Dryer and GSI Quiet TopDry and Recon SpreadSense.

The Massey Ferguson WR9900 Series Windrower OptiAir Cab Suspension incorporates a four-post air suspension system for ultimate ride, 40% less vibration and greater noise suppression.

The Fendt IDEAL Combine is the first “clean-sheet” design of an axial combine in 30 years.

In Fendt tradition, it is loaded with innovations that provide in-field efficiency, unfailing uptime, simple operation and excellent grain quality.

The awards will be presented in February during ASABE’s annual Agricultural Equipment Technology Conference in Louisville, Kentucky.

RNLI acquires specialist tractor builder
The RNLI recently acquired the articulated Talus MB-4H produced by Clayton Engineering Ltd, with whom it has had a very close working relationship for forty years. Bruce Lett reports

Visitors to last year’s National Ploughing Championships may have noticed a very different crawler-type tractor on WR Shaw’s stand.

The crawler in question is owned by the RNLI (Royal National Lifeboat Institution) and based at Clogherhead lifeboat station, Co Louth.

It is one of approximately 30 crawler tractors built by Clayton Engineering Ltd in Wales for the RNLI.

The Talus MB-H crawler seen at The Ploughing was specifically designed for the RNLI to launch and recover lifeboats from beaches.

Weighing in at 19t and powered by a 210hp V8 Caterpillar engine, Clayton Engineering’s Talus MB-H crawler seen at The Ploughing was specifically designed for the RNLI to launch and recover lifeboats from beaches.

The firm has built a number of specialist tractors for the RNLI, including the County-based MB-764 and the RNLI/Clayton-designed Talus MB-4H.

The latter is articulated, which has earned it the nickname “The Bendy”.

In January this year, the RNLI acquired Clayton Engineering Ltd, with whom it has had a very close working relationship for 40 years. This followed the retirement of the current owners and managing director. The firm manufactures and supplies almost half of the RNLI’s lifeboat launch and recovery systems used throughout Ireland and the UK.